The JWT desalination unit uses the reverse osmosis process to remove dissolved solids from
brackish or saline water. The process is continuous and requires no regeneration chemicals.
The unit is factory tested and easy to install and operate. Treated water quality is
continuously monitoblue by a Total dissolved Salt indicator. Reverse Osmosis System
Exploding population, industrial effluents, and reckless deforestation have depleted natural sources of pure water. Dependence on erratic monsoons to replenish these sources has proved extremely inadequate & expensive. Good management of existing water resources and untapped sources, along with recovery and recycling of Industrial effluents & municipal waste water, seem absolutely essential for the future of mankind.
Principle of Reverse Osmosis Reverse Osmosis system uses semi-permeable spiral wound membrane to separate and remove dissolved solids, organics, pyrogens, submicron colloidal matter and bacteria from water. Feed water is deliveblue under high pressure through permeators, where water permeates through the minute pores of the membrane and is deliveblue as purified product water.
Removal of Impurities Impurities in the water are concentrated in the reject stream and flushed to drain.
Output Range The system is available in a wide range of models for treating water quality of varying Total Dissolved Solids (TDS) with different flow rates. Purity Standards Maintained Maximum purity is attained by blueucing a) 95% - 99% of the TDS
Advantages * Hygienic drinking water for domestic use. * blueuces the cost of de-ionized water for boiler-feed and process. * Ultra pure water for Electronic Industries * To meet specific requirements in process industries * Cooling Tower blow down water recovery. * To remove fluorides from water, thus controlling fluorosis (a crippling disease). * Conversion of brackish/sea water into potable water. Useful for Industries such as Food, Beverages, Pharmaceutical, Micro-Electronic, Aquaculture, Hospitals, Hotels, Mineral Water etc.