Sewage Water Treatment Plant
Jalamrut’s excellent sewage treatment is to remove contaminants from wastewater to produce effluent suitable for discharge to the environment or re-use, preventing water pollution caused by raw sewage discharge. It includes physical, biological, and sometimes chemical processes to remove pollutants. Its aim is to produce environmentally safe sewage water, called effluent, and a solid waste called sludge or biosolids, suitable for disposal or reuse.
Reuse is often for agricultural purposes, but more recently, sludge is being used as a fuel source. Water from the mains, used by manufacturing, farming, houses (toilets, baths, showers, kitchens, sinks), hospitals, and commercial and industrial sites, is reduced in quality as a result of the introduction of contaminating constituents. Organic wastes, suspended solids, bacteria, nitrates, and phosphates are pollutants that must be removed.To make wastewater acceptable for reuse or for returning to the environment, the concentration of contaminants must be reduced to a safe level, usually a standard set by the Environment Agency.
Effluent Treatment Plant
ETP (Effluent Treatment Plant) is a process designed to treat the industrial waste water for its reuse or safe disposal to the environment. This method is used by industries to clean water and to get rid of any toxic and non-toxic materials or chemicals from it. This water can then be reused or released in the environment without causing a lot of harm to the environment.
Why do industries need ETP treatment?
- To clean industry effluent and recycle it for further use.
- To reduce the usage of fresh/potable water in Industries.
- To cut expenditure on water procurement.
- To meet the Standards for emission or discharge
Jalamrut is a leading provider of effluent treatment plant solutions for industrial and municipal clients. Our team of experts specializes in designing, installing, and maintaining efficient and cost-effective treatment systems to meet the unique needs of each client.
Our effluent treatment plants use a combination of physical, chemical, and biological processes to remove pollutants and impurities from wastewater. We use state-of-the-art technology and equipment to ensure that the treated water meets or exceeds all applicable environmental regulations.
Jalamrut designs, installs, and maintains efficient and cost-effective ETPs for industrial and municipal clients. Our ETPs use a combination of physical, chemical, and biological processes to treat the wastewater. The physical processes include screening, grit removal, and sedimentation. Chemical processes such as pH adjustment, coagulation and flocculation are used to remove dissolved impurities. Lastly, the biological processes, such as aeration and activated sludge treatment, are used to remove organic pollutants.
Jalamrut’s ETPs use a combination of physical, chemical, and biological processes, state-of-the-art technology and equipment to remove pollutants and impurities from wastewater, to make it safe for discharge into the environment or for reuse and meet the environmental regulations.
Zero Liquid Discharge System
In the current Scenario, water is the most precise natural resource and as being industry, we should use water in the best manner. Zero liquid discharge technologies help plants meet discharge and water reuse requirements. Our zero liquid discharge not only saves water but the running cost of our system is very low, depending upon the capacity of the plant. Both in terms of investment and running cost Jalamrut offers the best technologies that meet the current requirements of pollution boards as well as the industry.
We provide the following types of systems for the zero liquid discharge:
- Single effect evaporator
- Multiple effect evaporator
- Mechanical vapor recompression